Validation & Idea Testing
Calculate market size two ways, top-down and bottom-up, with one example business run from TAM to SOM and every input either sourced or labeled.

By the end of this guide you will have a market size you can defend line by line. That means a total, a serviceable slice, and a first-year number tied to the work you can actually do. You get there by running the same business through two methods, top-down and bottom-up, and checking whether they agree.
The example below is a fictional cats-only boarding hotel called Loftcat, with ten private suites in one city. Every input is either taken from a named public source or labeled as an assumption, so you can see exactly which numbers to replace with your own.
Market size is the total amount customers spend, or could spend, on a specific kind of product or service in a year. It is usually stated in revenue, sometimes in units or customers. A single figure is rarely enough, so founders split it into three nested numbers:
Each number answers a different question. TAM tells a reader whether the category is worth attention. SAM tells them whether your version of it is. SOM tells them whether your plan and your revenue forecast are grounded in reality.
Every market sizing method comes down to one multiplication:
Market size = number of customers × average annual spend per customer
What changes between methods is where those two inputs come from. Top-down starts from a published total and narrows it with percentages. Bottom-up starts from a count of customers and a price, then multiplies up. Run both, because each one exposes the weak spots in the other.
You need three kinds of inputs, and each has a natural home.
Write down where every number came from as you go. Anyone reviewing your plan will ask about an input with no source, so label it as an assumption before they do.
Top-down starts with the biggest credible number you can find and trims it until it describes your customer. For Loftcat, that customer is a cat-owning household that pays for boarding, and the starting number is U.S. spending on pet services outside veterinary care.
| Step | Input | Source | Result |
|---|---|---|---|
| 1 | U.S. "other services" pet spending, all pets | APPA 2025 actual figure (as listed in fall 2026) | $14.3 billion |
| 2 | Share of that spending that is boarding | Assumption: 30% | $4.29 billion |
| 3 | Share of boarding spending that is for cats | Assumption: 15% | about $640 million |
APPA reports $14.3 billion in "other services" spending, and it defines that category as boarding, grooming, insurance, training, pet sitting, pet walking and all other services outside veterinary care. The figure covers every species, so it needs two cuts: first to boarding, then to cats. APPA does not publish either share, so steps 2 and 3 are assumptions, and they are the weakest links in this estimate.
That is the standard problem with top-down work. The starting number is solid, but every percentage you apply after it is a guess. Two guesses multiplied together can move the answer by a factor of two or more without anyone noticing.
The bottom-up approach builds the same TAM from the customer level: the same cat-owning households, counted one by one instead of carved out of a total. It asks how many buyers exist, how many actually pay for the service, how often, and at what price.
| Step | Input | Source | Result |
|---|---|---|---|
| 1 | U.S. households that own a cat | APPA 2025 National Pet Owners Survey | 53 million |
| 2 | Share that pay for boarding in a year | Assumption: 10% | 5.3 million households |
| 3 | Boarding nights per household per year | Assumption: 4 | 21.2 million nights |
| 4 | Average price per night | Assumption: $28 | about $590 million |
The bottom-up TAM comes to about $590 million, in the same range as the top-down $640 million. Because both tables now describe one population, cat-owning households paying for boarding, the comparison means something. Treat the agreement as a consistency check, not proof. Both estimates rest on assumptions, so the real value of running them side by side is that you now know which three or four numbers carry the whole result.
Scope matters here. Had the top-down table stopped at all pet boarding, it would have included dogs and landed several times higher, and the gap would have said nothing about your assumptions. Make sure both methods count the same customer before you compare them.
If the two methods had landed far apart on the same population, say $600 million against $2 billion, that gap would point to a broken assumption. Check the share of customers who pay first; it is the easiest input to overestimate.
Loftcat is one location serving one metro area, and it charges more than a mixed kennel because it offers quiet, cats-only suites. Its SAM is the boarding spending in that area from households likely to choose a cats-only hotel.
| Step | Input | Source | Result |
|---|---|---|---|
| 1 | Households in the service area | Assumption: 500,000 (replace with your county's Census count) | 500,000 |
| 2 | Share that own a cat | Assumption: 35% | 175,000 |
| 3 | Share that pay for boarding | Assumption: 10% (same as TAM) | 17,500 |
| 4 | Share that would choose a cats-only hotel | Assumption: 40% | 7,000 households |
| 5 | Annual spend per household | Assumption: 4 nights × $40 | $160 |
| SAM | about $1.1 million |
Keep the TAM and SAM assumptions consistent. If you assume 10% of cat owners pay for boarding nationally, do not quietly switch to 25% for your own city unless you have local data that says so.
Step 4 is the one to test first. A short survey of local cat owners, or conversations at vet clinics and pet stores, will tell you far more about demand for a cats-only option than any published total.
SOM is where most market size analysis goes wrong. A common shortcut is to take SAM and apply a small percentage ("we only need 5%"), which hides the real constraint. A better way to estimate market size at this level is to start from capacity, then check it against competition.
Loftcat's capacity looks like this:
So Loftcat's SOM is about $58,000, or roughly 5% of its $1.1 million SAM. That ratio is the reality check. If your SOM needs 30% of SAM in year one, you are assuming you will beat every competitor in town before you have a single repeat customer.
Then count those competitors. Vet clinics and kennels that board cats are easy to find, but many pet sitters work alone, without employees, so they do not appear in employer business counts. The Census Bureau's Nonemployer Statistics series covers businesses with no paid employees by industry and area, including the number of establishments and their total receipts. Add the local options you find through search and maps, and your competitor analysis will tell you whether 365 households is a modest share or a crowded fight.
Use the Loftcat tables as a template and swap in your own inputs, in this order:
The SOM figure is the most useful output of the seven steps. It becomes the year-one revenue line in your financial projections, and it tells you whether year-one revenue can cover your own pay.
All three numbers belong in the market section of a business plan, with sources and assumptions shown underneath. The market analysis section walkthrough covers how to present them alongside segments and competition.
Look back at your tables and find the one assumption that, if it were wrong by half, would change your SOM the most. For Loftcat, that is the share of local cat owners who would choose a cats-only hotel. Confirm that single number with real customers before you refine anything else, because a precise TAM built on an untested premium is still untested.
EntraWorld's AI business tools cover market research, business plans and financial models. When you are ready to put your market size to work, join EntraWorld free and build the plan around it.
Start free. The first 5,000 Premium memberships include a full year of every tool.
Join EntraWorld free →